Category » Foot pedals and headsets

There were 6 articles found in this category:

1. My foot pedal cuts out/stops working
   These steps are for resolving an intermittent foot pedal issue. These suggestions apply to foot pedals that are dropping connection and that have stopped working altogether. 1. Disconnect the foot pedal and reconnect it to a different USB port. If you are using a USB adapter (HUB) try to bypass ...
2. Will my foot pedal work with an adaptor?
   This is not a supported use of the foot pedal and software, often you will still get it to work if you make sure it is the correct pedal. The best way to try to get this to work is to plug in the adaptor first and see if your computer can install the drivers it needs to know what the adaptor is. ...
3. Setup & Troubleshooting your USB headset
   It is highly recommended to plug your new USB headset directly into a USB port on the back of your computer. If you are experiencing issues with your USB headset, try these suggestions: 1. Disconnect the headset and reconnect it. If you are using a USB adapter (HUB) try to bypass it and co ...
4. My USB foot pedal does not respond in Gearplayer™ 4
   1. -First, ensure you have a foot pedal that this compatible with GearPlayer. -For USB, this includes the IN-USB-1, IN-USB-2, and CL-USB. 2. -Did you plug the foot pedal in before or after you opened GearPlayer? -If you plugged the pedal in after opening GearPlayer, close GearPlayer and then ope ...
5. Will my foot pedal from a different system work?
   The GearPlayer™ software requires that you use very specific pedals, either the IN-USB1, IN-USB-2, CL-USB, and the IN-DB9. No other pedals are supported at this time for use with Gearplayer. You can check which pedal you have by looking for the sticker on the bottom of it.
6. Setting up your 9-Pin serial connector (IN-DB9) in GearPlayer™ 4
   -Launch your GearPlayer 4 application. -Click on tools and options. -In the foot pedal tab, you need to make sure that serial is selected. -Select the COM port you think the computer is currently set to use and then press test selected foot pedal. -At that point, you will need to test the d ...